TopTech JCH100A air plasma power source worked with updated ARTTEC I table CNC cutting machine in 2017 for your new requirement!
TopTech JCH100A and ARTTEC I had updated new apearance with more effective cutting functions.
Input voltage: 380V/415V, 3 phase, 50Hz
Input current: 22.3A
Duty cycle: 80%
Output current: 20-100A
Edge start capability: 50mm
Recommended: 30mm
Pierce capability: 20mm
For more detail information of TopTech JCH100A and other plasma cutters, please feel free to contact us.
www.toptechone.com
info@toptechone.com
sally@toptechone.com
2013年4月3日星期三
TopTech Exclusive Secret Tips --How to improve CNC cutting effective? (I)
TopTech Exclusive Secret Tips--How to improve CNC cutting effective? (I)
The main difference among CNC cutting, manual cutting and shape cutting is the cutting speed, accuracy, which CNC cutting is the best than the other two. But there was an issue that some customers had purchased CNC cutting machines, and the working effective wasn’t improved. The mainly reason is that they don’t know much knowledge about CNC cutting machine and can’t use them with high proficiency. For this kind of situation, we’d like to share TopTech exclusive secret tips as following.
 |
| TopTech ARTTEC III HD plasma cutting machine |
I.CNC controller is not stable will lead slow cutting.
The heating of CPU and hard ware in CNC control system leads the system unstable
and can’t run stable. The damage of fan, shaking of hardware or virus influence lead procession stop. And also it maybe the bug of CNC cutting system software, which shows error or cutting error. It also will delay cutting process and then influence on cutting quality issue.
II. No using nesting software leads cutting materials low-usage.
No using nesting software, and using manually nesting on CNC controller system for the parts to do the parts cutting, this is wasting of time and materials. So please using nesting software, which comes with TopTech CNC cutting machines together. And the more details of this point secrets tips will share on the second part of this article.
III. No Auto cutting technology and cutting parameters database in CNC system.
Operators adjust CNC cutting machines parameters only with eyes and experience,
which can’t make auto piercing and auto cutting. This makes cutting machines with low effective.
IV. Using unsuitable cutting way.
During cutting, the cutting way is too simple, e.g. cutting every parts need pierce every time and need cut the full parts. No co-edge, borrow edge, bridge connection, etc. high effective cutting ways, lead cutting low effective and cutting consumables (esp. plasma torches’ consumables) waste a lot!
Hope if customers noticed the above points, it can improve CNC cutting machines
more effectively and save more cutting materials.
TopTech after sales contact info:
Email: info@toptechone.com
Skype: info-toptechone
2012年10月9日星期二
Water jacket plasma cutting,TopTech ARTTEC I
TopTech ARTTEC I table CNC plasma cutting machine, cutting with water jacket to cut 0.2mm galvanized sheet.
Fast cutting speed and no bending.
TopTech, cut what you want!
www.toptechone.com
2012年6月9日星期六
Plasma cutting machine--TopTech ARTTEC I
订阅：
博文 (Atom)