2015年9月16日星期三

TopTech Laser cutting tips I

TopTech Laser Cutting Tips I

--Fiber laser CNC cutting machine

Laser cutting is a non-touching processing way to avoid machine pressure and have perfect working process on the surface. The super control system, Eckelmann EXC880, makes not only precision processing, but also sharp angle, small hole, and more complicated geometric figure cutting which cant be done by traditional cutting die process. With advanced IBE nesting system inside Eckelmann EXC880 which adopt on TopTech laser cutting machines, it totally reduce human cost and material lost.
After more than 20 years development of laser technology updating and working process all over the world, laser cutting technology and laser cutting machines had been accepted and familiar with vast plates processors about high effective, high precision, perfect cutting finish of laser cutting process.
According to different types of laser sources, right now there are 3 main types of laser cutting machines: CO2 laser cutting machine, YAG laser cutting machine (also called solid laser cutting machine), and fiber laser cutting machine.
TopTech would like to share the differences, advantages of these 3 types laser cutting methods.

I Fiber laser cutting machine--TopTech FIBER II

Fiber laser cutting machine, TopTech Fiber II, transfers laser source through fiber, which is much more improving its flexibility. With fiber as laser transportation material, fiber laser cutting machine has least stoppage, least maintaining process, fastest cutting speed among these 3 types laser sources. But due to its wave length is 1.06um, which cant be non-metal absorbed, it cant cat non-metal materials.
Fiber lasers light-electric percent conversion can reach as high as more than 25%. And its cost on electric and cooling system is best than other tows. According to International safety standard, fiber laser damage is on 4th class, so when people operates fiber laser cutting machine, it must have safety cover to protect peoples eyes. TopTech have ability to according to customers requires to design and manufacture out side cover.

ADVANTAGES of fiber laser cutting machine:
Fiber laser mode is good for metal cutting. Its light-electric conversion can as twice as CO2 laser source. And during cut thin stainless steel, carbon steel plates, the cutting speed is fastest one among these 3 types laser sources. Kerf of fiber laser is thinnest, and facula of fiber laser is best, which these 2 points had used on precise cutting.

ATTENTION on fiber laser cutting machine:
1. Right now the key parts of fiber laser source is held in 1 or 2 European and USA manufacturers. So the price of fiber laser machine is very expensive.
2. During fiber laser cutting, due to the kerf is very thin, the gas consumption need a lot, especially with nitrogen cutting.
3. Fiber laser cutting machine is very difficult to cut Aluminium plates and Copper plates.
4. For fiber laser cutting machine, usually be used on less than 12mm thickness plates, which can reach high precision cutting. And with more than 2000W fiber laser cutting machines appeared, as TopTech Whitney lasers, fiber laser cutting machine will take over CO2 high power laser cutting machines in the market.

2 条评论: